Render — production photo to follow
Render
Render
RenderLamps / Table lamp
Dune Fin
Twenty-four fins on a leaning drum.
A$279 AUD · incl. GST
Made to order · 2–3 weeks · yours ships by 16 October
A teardrop drum that leans eight degrees off vertical, carrying twenty-four solid fins. The fins are tall on one side and shrink to almost nothing on the other, and each fin's edge ripples as it climbs, so the outline shifts as you walk around it. The fins converge into a closed rosette at the top.
Designer’s note
This is the one we argued over most. Straight ribs are easy and look it. Modulating the fin height around and up the body — the wind side tall, the lee side low — gives it the sand-dune read we were after, and the lean does the rest. Thick fins, thin drum: the light comes out only between the fins, as twenty-four vertical blades on the table.
Formada Studio, Melbourne
Details
- Dimensions
- 306 mm high × 176 × 175 mm (on the base ring)
- Weight
- ≈ 290 g shade
- Material & finish
- Terracotta marble PLA (shown) or sandstone speckle; also amber PETG where the fin edges glow. Base ring in charcoal matte PLA. Colour options above; every finish is the material’s own — nothing painted or coated.
- Construction
- 1.2 mm drum, 1.6 mm solid fins. Printed in one continuous piece per part, no supports, no glue.
- Light source
- Designed around a Ø80 mm LED puck light (USB or battery), which pushes up into the base ring from below. Light source not included — LED only, never incandescent or halogen.
- Light on the wall
- Twenty-four vertical blades of light; a dimmed band at the base.
- Lead time
- Made to order, 2–3 weeks. Orders this week start on Monday 21 September and ship by 16 October.
- Care
- Dust with a soft dry cloth or a cool hair-dryer. Keep away from direct sun and heat above 50 °C. Indoor use.
- Origin
- Designed and printed in Melbourne.
One piece at a time, slowly, in Melbourne.
Colour, base ring, diffuser and an optional engraving. Nothing is stocked; every lamp is printed for its owner.
Orders placed this week go onto the printer from Monday 21 September. Most shades are a single eighteen-to-twenty-hour print.
We email a photograph of your piece on the printer, and again when it is finished and checked.
Packed with the base ring and a signed card, 2–3 weeks from order. FREE AU over $100.
More from the collection
All lamps
A woven diamond shell over a frosted core.
Render — photo to followEleven tiers, drifting off-axis.
Render — photo to followThirty-six pleats, a forty-degree twist.
Render — photo to followA pierced shell over a frosted sleeve.
Render — photo to followA closed basket-weave, gathered to a tip.
In developmentA domed cap on a slim stem.